I've been storing my trailer at work but I handed my notice in last week

So I have three options.

Ignore the wife and stick it in the middle of the front garden
Find some where else.

Flog it.

I bought it from "Madteg" on here who is a welder and fabricator by trade. He made it to fit his "book" live axle locost. So that's what it will take. But I will get some measurements tomorrow. Its un-braked so is 750kg max

All I've done is put a new lighting board on it and add a jockey wheel and a couple of bits of 25mm box and board it out with 18mm outdoor ply. The box was just to support the edges of the ply.

Its a tilt bed design where you undo two nut/bolts and lower the bed down with the ratchet.

The trailer absolutely saved my arse when it came to moving house at xmas as I made a big roller skate for my lathe. I was able to load it on my own by just tilted the bed and pulling the lathe up and loaded the rest of my garage around it.

Ive used it just a couple of other times to move furniture for family members.

Condition,

Its ready to use but wants some cosmetic tlc. I didn't paint the ply and the whole thing could do with a lick of paint.

It owes me a bit over £300 so to a fellow locoster £250. After this week end I will bring it home and get the kids to work on it for ebay .

Located near Spalding Linc's

Here is how it looked when first made to give you an idea of the bed.

Bad timing, wife's out of work - otherwise I would have pulled your arm off for this :-(

Do you have the size of the metal bed ? A friend might be up for this but need to know length, also inside & outside dimensions of where the car would sit because he has a couple of minis in various states of wideness.

Cheers

I don't need a trailer although I know I couldn't make it for that price!!!!!

u2u'd

Replied and dims as promised. Dims are approximate, If critical I can double check.

So loading area is 2.99M long by 1.67m wide inside the triangulation. 1.73m out side the triangulation.



[Edited on 19/8/15 by big_wasa]

u2u'd

No answer from my chum yet so pass it on.

No probs,


prov sold.

Hi Mr Big. Bit late and missed the chance to buy this by the looks, but if your deal fails, I'll take it. Be ideal for me Rush.
Cheers
JB