I bought it a few years ago for a Rover v8 project. The engine is gone so this is surplus to requirements.
The ecu is map bassed for load so is more suited to single carbs.
It comes with,
The ecu,
the odd ecu to serial lead,
a serial to USB adapter ( this won’t work on windows 10 ),
the Edis 4 with plug and short tales,
the Edis 8 with plug and long tales.
One silver top 4cyl coil pack,
one molex plug with no pins ( needs two broken ones removing),
one molex plug with lots of wires and long tales,
a couple of bits of shield cable and a couple of plugs
and finally a printed set of instructions.
I am not interested in splitting it up but with an Edis worth around £40+ this has the potential to be a very cheap programmable ecu if you sell the one you don’t need.
I havnt used it but I have powered it up and loaded a Zetec map and checked the map sensor responds to vacuume and pressure.
Price, £150 please.
Collection is welcome and preferred but will post by courier for a tenner.any questions please ask.
[Edited on 3/6/18 by big_wasa]