With an extension in the near future, I've been instructed to have a clear out, apparently we need the space!

All located in Sutton Coldfield, West Mids - will post for cost. If needed, I frequent Lincoln, Coventry, Stoke, Derby and Birmingham.

I've posted the price i'd be comfortable with, but all offers are welcome and be considered!

Here we go:

1. Acewell 7652 Digidash - Used, but good condition - £100


Digidash

2. Alloy Header Tank - £20


Header1

3. RamAir Trumpet Socks - £20


Socks

4. Rad with Fan - £30


Rd2

5. Speedo and Rev Counter - SOLD


DIals

6. DanST Duratec Manifold, Heavy Duty Gasket, CBR ITBs with injectors (recently balanced), Trumpets and Pipercross Filter - Cost in excess of £500 - £250


Inlet

ITBsTJD2

7. Doors - £50


Doors

8. Alloy Header Tank - £20


Header2

9. MS1 - SOLD


MS1

10. MS Simulator - £50


MSCont

11. 12v Clock - £5


Clock

12. VDO Temp - £10


Temp

13. VDO Fuel - £10


Fuel

14. Pipercross Filter - £10


Pipercross

15. Pinto Clutch - SOLD


PLate

16. 220m Clutch - £20


PLate2

17. Alloy Rad - £40


Radiator

[Edited on 24/7/18 by tomduffield13]

[Edited on 24/7/18 by tomduffield13]

[Edited on 25/7/18 by tomduffield13]

U2U sent re MS1

Is the speedo mechanical or electric?

What is the diameter?

quote:

---

Originally posted by Norfolkluegojnr
Is the speedo mechanical or electric?

What is the diameter?

---

Thanks let me know, could be just what i'm after - mine current reads sod all!

quote:

---

Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!

---

quote:

---

Originally posted by tomduffield13

quote:

---

Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!

---

Near as makes no difference 100mm, 103mm to be exact!

---

quote:

---

Originally posted by Norfolkluegojnr

quote:

---

Originally posted by tomduffield13

quote:

---

Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!

---

Near as makes no difference 100mm, 103mm to be exact!

---

bugger! the hole is 90mm, with no room to increase. Thanks anyway

---

I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks

quote:

---

Originally posted by snapper
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks

---

quote:

---

Originally posted by tomduffield13

quote:

---

Originally posted by Norfolkluegojnr

quote:

---

Originally posted by tomduffield13

quote:

---

Originally posted by Norfolkluegojnr
Thanks let me know, could be just what i'm after - mine current reads sod all!

---

Near as makes no difference 100mm, 103mm to be exact!

---

bugger! the hole is 90mm, with no room to increase. Thanks anyway

---

Ahh, that's the front measurement, the insert is smaller so it sits on the dash.

Picture with tape measure: https://ibb.co/k8ZVuT

Tom

---

Can i have the alloy rad #17 and the alloy header tank #8 please

quote:

---

Originally posted by motojohn
Can i have the alloy rad #17 and the alloy header tank #8 please

---

quote:

---

Originally posted by tomduffield13

quote:

---

Originally posted by snapper
I’ll have the Duratec throttle bodies and manifold kit
Could do with a few more details pls
Port size of manifold
Port size of bodies
Injector rating
Anything else you know
Thanks

---

I’ve had a first interest on the TBs, so you’re pencilled in if they don’t want them snapper.

I’ll send you the details tonight when I’m home from work.

---

8 (Header), 10 (Stim) and 17 (Rad) also sold.

Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.

Anyone for anymore before I list on Ebay? (Offers invited!)

quote:

---

Originally posted by tomduffield13
8 (Header), 10 (Stim) and 17 (Rad) also sold.

Manifold and TBs are being collected on Saturday, If not, snapper is next in the queue.

Anyone for anymore before I list on Ebay? (Offers invited!)

---

Thanks for your enquiry!

£21.10 through royal mail international, 5-7 days - so £41 all together.

Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay... has anyone got experience of this, where you ship it domestically and they forward on?

[Edited on 2/8/18 by tomduffield13]

u2u re Acewell

Update:

1. Acewell 7652 Digidash - Used, but good condition - SOLD
2. Alloy Header Tank - £20
3. RamAir Trumpet Socks - £20
4. Rad with Fan - £30
5. Speedo and Rev Counter - SOLD
6. DanST Duratec Manifold, Gasket, CBR ITBs with injectors, Trumpets and Pipercross Filter - SOLD
7. Doors - £50
8. Alloy Header Tank - SOLD
9. MS1 - SOLD
10. MS Simulator - SOLD
11. 12v Clock - £5
12. VDO Temp - £10
13. VDO Fuel - £10
14. Pipercross Filter - £10
15. Pinto Clutch - SOLD
16. 220m Clutch - £20
17. Alloy Rad - SOLD

Open to the cheekiest of offers, ask away.

quote:

---

Originally posted by tomduffield13
Thanks for your enquiry!

£21.10 through royal mail international, 5-7 days - so £41 all together.

Happy to proceed if you still want it, but it may be cheaper if I list it on ebay for you and use the international postage service through ebay... has anyone got experience of this, where you ship it domestically and they forward on?

[Edited on 2/8/18 by tomduffield13]

---