Board logo

Another Garage Clearout
Ben_Copeland - 8/10/19 at 12:17 PM

Few bits leftover

Type 9 gearstick with alloy knob. £20

Wheel spacer 20mm with 70mm centre bore. £15

Sch10s 1-1/2” stainless steam pipe for use in turbo manifolds enough to make 2 manifolds. 1 part built manifold and box of extras. Over £200 worth. £100

Z20LET stainless exhaust flange, not used, but has been welded too. £10

Set of Ford fitment alloys and R1R tyres. Been in the garage for a few years. Tyres have a bit of life in them. Alloys are approx Et16 so will make the car wider. Good for filling wide rear arches. Saxo offset I believe. 4 centre caps (4 bolts) Paints ok, can’t remember the make of them. Couple have quite a lot of weights on but they were fine on my car. Nice and lightweight. £60

Plus postage at cost. stainless pipe is heavy so suggest collection for Margate.



Sch10s
Sch10s

Sch10s
Sch10s

spacers
spacers

type 9 stick
type 9 stick

wheels
wheels

wheels
wheels

wheels
wheels


[Edited on 8/10/19 by Ben_Copeland]