Hi,
I'm after one of these housings on the loom side.
http://uk.mouser.com/ProductDetail/TE-Connectivity-AMP/184000-1/?qs=sGAEpiMZZMs7eK6h2EBtKibIuD3x11VKzkSsz1e6ajQ%3d
For one of these Type 1a sensors -
http://www.webcon.co.uk/Downloads/K40016%20Ford%20Zetec%20(Black%20Top)%20Eng%20Temp%20Sensor.pdf
Has a central Keyway.
I only need the housing, I have new pins seals etc.
Ideal if you have an engine from a scrap yard which has had the loom cut off.
Thanks
Mike
Type 1a 1b should be the same.
I am sure I have one, its just the ecu coolant sensor plug.
If you want it just send me a Self addressed jiffy bag.