Board logo

Locost Wishbones wanted
kevyo89 - 11/1/19 at 10:28 AM

Before I buy/attempt to make my own, I am after some wishbones to suit the locost chassis and Cortina uprights.

I am not keen on the standard Locost (Ron Champion) geometry but I understand that MK and Westfield wishbones will fit?

Wider-track preferable.

Anything around?


big_wasa - 11/1/19 at 02:04 PM

Depending on your skills you would be better making them to suit your needs.

Early manufacturers copied the copy.

I've now got an mk Indy and it has bugger all self centreing.

Many will have wider / shorter front track than your rear axle.


kevyo89 - 11/1/19 at 02:25 PM

quote:
Originally posted by big_wasa
Depending on your skills you would be better making them to suit your needs.

Early manufacturers copied the copy.

I've now got an mk Indy and it has bugger all self centreing.

Many will have wider / shorter front track than your rear axle.


Ahh, I know - you're right. I'm just reading so many conflicting things and I can't remember what's right at this stage lol.

I have a few drawings done which ill throw up for some of you guys to run your eye over.