Board logo

WTD: crossflow thermostat housing / filler neck
wonderfulweasel - 5/4/20 at 12:54 PM

Has anyone got one of these lying around that they don't need?


rusty nuts - 5/4/20 at 01:27 PM

Think I have a standard t/stat housing somewhere? Not the filler neck or thermoswitch type though


myke pocock - 5/4/20 at 02:53 PM

Quite rare I think. I got mine from Burton years ago. Assume they are still making them.


rusty nuts - 5/4/20 at 04:09 PM

https://www.burtonpower.com/thermostat-housing-alloy-billet-x-flow-rwd-fp610.html


myke pocock - 5/4/20 at 05:27 PM

Think this is the one he is after. If memory serves me well they were fitted to the XR2? https://www.burtonpower.com/special-thermostat-housing-fp610m.html


wonderfulweasel - 5/4/20 at 08:00 PM

Thanks for your input. I have a couple of the standard ones. It is the XR2 style one I'm after, but I was hoping to avoid the £72 price tag!


trextr7monkey - 7/4/20 at 07:30 PM

I might be able to help here I have the one you are looking fitted and have been thinking of swapping it for the original which puts the hose out at a better angle for radiatorI used to have loads of spares but sold them off to create space so haven’t got one. I can send picture via email as they are troublesome to load on here
Atb

Edit Strangely I have effortlessly loaded up pic to my archive pic is called “thermostat “
Mikew

[Edited on 7/4/20 by trextr7monkey]