Board logo

Exhaust pipe
myke pocock - 6/4/20 at 10:01 PM

Hiya, I am looking for a short length of exhaust pipe, 1 1/8 to 1 3/16 inner bore ERW steel pipe, 1.5mm wall for an Austin 7 fish tail exhaust. I only need a maximum of 12 inches if anyone has any. Please PM with cost and carriage in UK, pay by paypal. Cheers.

ianhurley20 - 7/4/20 at 08:07 AM

i went to a local exhaust fitting company when I made my exhaust manifold and exhaust system and raided their scrap bin for straight bits bends etc of the dia I wanted. They were well pleased to lose them and they cost me nothig. (I then cut and welded together a 4 into 1 manifold and pipework to a weld in cat and stainless universal silencer!) I am sure you would be able to find what you want for little if no cost particularly if its also your local tyre dealer as well where you are known.

cliftyhanger - 7/4/20 at 08:12 AM

Afraid I only have some bits of much larger tube, as most on here will have. (2 ans 2.25" )

But when I built my system, I bought tube from ebay sellers, and small lengths are pretty reasonably priced (I think a 500mm lenth of stainless cost me under a tenner delivered)

[Edited on 7/4/20 by cliftyhanger]

jtskips - 7/4/20 at 08:44 AM FKB7H58TkA