Board logo

Polished Alloy Bodywork
myke pocock - 18/7/18 at 07:58 PM

Just polishing the alloy body panels with Autosol which does a cracking job. However is there anything that I can polish the panels with after to add protection? Have tried some Halfords standard car polish I had in the garage but it leaves streaks on the alloy.


steve m - 18/7/18 at 09:55 PM

Your on the slippery road of decline now, and I so wish I didn't polish my car 20 years ago, as its a mammoth task to keep it "shiney"

and to your question, no there isn't a magic sealer, that im aware of, laquer wont stay on the panel, clear film neither, if you leave it more than a week, it looks SHYTE, if you polish it with car wax, it looks SHYTE,

welcome to my club, !!

steve


Bluemoon - 18/7/18 at 10:17 PM

Aircraft metal polish some have additives that help. I use polishing mops and soap first then the aircraft polish to finish. Top up polishing is then done using the aircraft polish. When laying up there are protection oils such as duck oil to help stop oxidisation in storage... I have a tin of aircraft polish in the garage better than megures (not bad) from halfords. Snag is garage is packed due to move and can't rember the name... Anyway searching for howto polish aircraft leading edge will give some ideas..

[Edited on 18/7/18 by Bluemoon]


J666AYP - 18/7/18 at 10:55 PM

Could you not buff up the alloy and then spray with clear coat? or wrap in clear vinyl?

Jay


907 - 19/7/18 at 05:24 AM

Paul G




Description
Description


40inches - 19/7/18 at 09:03 AM

Turtle Wax Extreme Nano-Tech Wax for Wheels?
Autoglym Wheel Protector?


David Jenkins - 19/7/18 at 09:30 AM

I've been using Meguiars NXT.

I find that using it once or twice a year is more than enough. Easy to apply, fairly easy to clean off with some flour on a dry cloth, and leaves a nice finish.


907 - 19/7/18 at 11:46 AM

quote:
Originally posted by David Jenkins


Easy to apply, fairly easy to clean off with some flour on a dry cloth, and leaves a nice finish.





Yes but what happens when you get caught in a shower followed by the sun coming out again. Pass the lemon juice.


rusty nuts - 19/7/18 at 06:05 PM

Another vote for Original Purple Metal Polish , quicker and easier than any others I've tried


David Jenkins - 19/7/18 at 08:32 PM

Where did you get that purple polish from? On-line, or over the counter?

The Meguiers stuff does work, but it can be a dirty process.

[Edited on 19/7/18 by David Jenkins]


Angel Acevedo - 20/7/18 at 02:21 AM

quote:
Originally posted by myke pocock
Just polishing the alloy body panels with Autosol which does a cracking job. However is there anything that I can polish the panels with after to add protection? Have tried some Halfords standard car polish I had in the garage but it leaves streaks on the alloy.


So it happens earlier today I saw a video on youtube where a guy polishes a piece of ali plate to a mirror finish....
https://www.youtube.com/watch?v=cpMetNWS98E
Tempting....


David Jenkins - 20/7/18 at 06:16 AM

quote:
Originally posted by Angel Acevedo
So it happens earlier today I saw a video on youtube where a guy polishes a piece of ali plate to a mirror finish....
https://www.youtube.com/watch?v=cpMetNWS98E
Tempting....


Impressive - but life's too short!


rusty nuts - 20/7/18 at 06:59 AM

David, I got mine years ago from Stoneleigh but there is someone based in Yarmouth selling it on eBay , it's California Custom original purple metal polish, about £22 a bottle plus P&P but it last ages . The first time I used it it initially didn't seem to be doing anything until I wiped off the very small amount of black residue and saw the shine


Mr Whippy - 20/7/18 at 11:16 AM

quote:
Originally posted by steve m
Your on the slippery road of decline now, and I so wish I didn't polish my car 20 years ago, as its a mammoth task to keep it "shiney"

and to your question, no there isn't a magic sealer, that im aware of, laquer wont stay on the panel, clear film neither, if you leave it more than a week, it looks SHYTE, if you polish it with car wax, it looks SHYTE,

welcome to my club, !!

steve


yeah I did this to my JBA Falcons bonnet (just stripped the paint off) and was then forever polishing it, total nightmare with all the louvres, that was a big mistake, lasted all of a week before it tarnished and looked like crap and as for hand prints


907 - 20/7/18 at 11:19 AM

I must admit it's not the easiest stuff to use, but being the sort of bloke I am I am willing to watch you practice on my car.