Board logo

Kit Car Services - turning and more....
flak monkey - 28/7/09 at 08:21 PM

I am now in a position to offer a few useful services to fellow kitcar builders and others.

My website is http://kitcarservices.co.uk which outlines most of what I can offer, but if you are after help with something which isn't listed, get in touch and I can probably help out.

These services basically include:

Turning (up to 19" diameter) - this could be anything from suspension spacers to custom hubs (some examples below).
Electrical and electronics work
Donor part reconditioning (including type 9 rebuilds at competitive prices)
Throttle body respacing (including fuel rails)
CAD work for laser cutting

and all sorts of other things.

Prices will be given on a job by job basis.

Some examples of turning:

* Blanking plugs for throttle bodies
* Bushes made to your requirements (aluminium, brass, nylon, bronze etc)
* Spacers (for suspension, rose joints etc)
* Propshaft spacers - made to your requirements. Properly bossed and recessed to ensure concentricty
* Hubcentric wheel spacers made to your specification
* Camber adjusters to your sizes (for front or rear custom wishbones)
* Threaded tubes for wishbones - with your choice of thread including M18x1.5 for transit track rods)
* Custom aluminium gearknobs
* Indicator stalks
* Custom made aluminium fuel rails, aluminium extrusion, drilled to your requirements for injectors, end tapped 3/8BSPT, ready to fit brackets
* Sierra upright tapered adaptors eccentric or concentric, your choice
* Concentric clutch cylinder spacers to your requirements drilled to suit your application
* Custom alternator pulleys single vee and poly vee
* Custom water pump pulleys as above
* Trigger wheel fitting pinto and crossflow including trigger wheel – laser cut trigger wheels and pulley modified to fit your application. Trigger wheel fitted on turned disc to ensure concentricity
* One off hose joiners
* Custom hubs
* Thread cutting available, both metric and imperial

and much more

Some pictures of a selection of the bits I have made:

Duratec billet fuel rail
Duratec billet fuel rail
Duratec billet fuel rail


Simple ali spacer
Aluminium spacer
Aluminium spacer


Type 9 cable speedo blanking plugs
Type 9 speedo blanking plugs
Type 9 speedo blanking plugs


GSXR Injector blanking plugs
GSXR injector blanking plugs
GSXR injector blanking plugs


And the above fitted
GSXR injector blanking plugs
GSXR injector blanking plugs


Throttle body adpators
TB Adaptor
TB Adaptor


[Edited on 29/7/09 by flak monkey]