LocostBuilders - powered by XMB

cvh to zetec ecu wiring diagram.

scotty g - 14/9/19 at 04:29 PM

Hi all,
Im running a budget 1.8 Zetec install using a basic ESC type ecu, anybody have a wiring diagram for using this?
ECU type - 89FB-12A 297-JA.

pmc_3 - 14/9/19 at 08:43 PM

Not sure if this helps, some wiring diagrams in this thread

http://www.turbosport.co.uk/showthread.php?t=162856

andy188 - 16/9/19 at 07:39 AM

Hi,

there are 2 versions of the esc, (not sure off the part nos) ive used a couple, they do restrict the power output, but theses are for 8v engines, not 16v. still gets them going, i used mine for a year or so.

There are a couple off photos in my archive which should be off help.

Andy

scotty g - 16/9/19 at 02:57 PM

not too sure which type i have as it doesn't say Edis4 or ESC on it. It's black (no red bit) and has the vacuum pipe like the ESC???

andy188 - 16/9/19 at 03:20 PM

think you might have the 1800 cvh one there, have you any wiring with it, I might be able to match the colours up with what I have.
Andy

scotty g - 16/9/19 at 03:24 PM

most have been cut away andy.