Board logo

Wanted:- Foam Tube...
Steve Hignett - 12/10/11 at 08:39 PM

Hi All,

Does anyone know where I can locate some foam tube with an O.D. of 11/12mm (or thereabouts).

As is used in this post on an MX5 forum:

http://www.mx5oc.co.uk/forum/forums/t/1319.aspx


Cheers (and thanks in advance),
Steve


Stott - 12/10/11 at 09:08 PM

This any good, I used it for my extension expansion gap but I guess ou could repair a car with it too!

Everbuild sealant Backer Rod foam Polyethylene 13mm 10m | eBay


philhoward - 13/10/11 at 06:36 AM

Try Seals + Direct for expanded neoprene cord


Steve Hignett - 13/10/11 at 09:09 AM

Thanks to both of you...

The first link, whilst maybe not as good is about a quarter the price, and since I'm not convinced it'll work (and with still being unemployed!) is the one I think I'll go for... Along with a bit of neoprene (wetsuit) glue to seal the rubbers back up again...

All in cost, inc del., is about £9.40 ish...

Cheers again for responses!

ATB
Steve