Board logo

Can anyone recommend harness makers who manufacture in the UK?
nick205 - 14/10/20 at 02:56 PM

Afternoon all,

As part of my day job I'm looking to source a loop of harness / seat belt type material with a small stainless steel fixing tab sewn into it. Think of a light weight rally car door pull strap. It has to be manufactured in the UK and ideally with 20-25mm wide strip of webbing.

Can anyone suggest harness or seat belt manufacturers who actually manufacture in the UK please?

Similar to this type of thing:

TimC - 14/10/20 at 03:09 PM

TRS, Securon

scootz - 14/10/20 at 03:48 PM

Titan were very accommodating

scootz - 14/10/20 at 03:48 PM

... and reasonably priced.

obfripper - 14/10/20 at 06:28 PM

Titon's website:

If they can't help, Amsafe Bridport make all sorts of aviation and military cargo restraint systems along with the actual webbing, with the current situation they may have space in their manufacturing capacity for some one off production runs.


ttalps2000 - 15/10/20 at 07:39 AM

i have titon belts and they are good. Been to their factory too as it used to be round the corner from where i was working at the time.

nick205 - 15/10/20 at 08:31 AM

Thanks again - I shall give Amsafe and Titon a try.

LCB pretty much always provides me with some useful information!

Mike Wood - 15/10/20 at 08:40 PM

Arinsdale manufacture in Scotland various nylon webbing lifting strops and tie down straps, include their Tensys range:
Worth a phone call as they do specials. I bought a set of car tie down straps and very happy with them.


[Edited on 15/10/20 by Mike Wood]

blakep82 - 16/10/20 at 08:44 PM

are prima motorsport/titon still going? i bought some harnesses from them years ago, when i fitted them they were a bit long, so asked them to shorten, which they did, but he did say to me they "were winding the company down"?

loggyboy - 16/10/20 at 11:18 PM

TRS have offices on Basingstoke.