Board logo

Zetec Megajolt Maps?
tocca - 12/8/10 at 12:23 AM

Hey guys, im running a 2.0 Zetec on Weber DCOE 45s. Ive installed megajolt but need a map to put on there!? Anyone got anything similar to my setup and has a map i can copy? Ive tried Autosportlabs website but nothing! Thanks guys


UncleFista - 12/8/10 at 01:20 AM

Most people (including me) seem to be using the one on the TigerCat site, but the site seems to have disappeared, taking a small megajolt map library with it

Here it is in text form;

#Ignition Configuration for MegaJoltLite Jr.
#Sat Nov 20 15:40:16 GMT 2004
userOutType1=1
revLimit=20
userOutType0=1
rpmBins=5,13,15,17,19,21,24,27,30,33
advance9=15,16,18,20,22,24,26,28,30,32
advance8=15,16,18,20,22,24,26,28,30,32
advance7=15,16,18,20,22,24,26,28,30,32
advance6=15,16,18,20,22,24,26,28,30,32
advance5=15,16,18,20,22,24,26,28,30,32
advance4=15,16,18,20,22,24,26,28,30,32
advance3=15,16,18,20,22,24,26,28,30,32
mapBins=20,30,50,60,100,130,150,175,200,220
advance2=15,16,18,20,22,24,26,28,30,32
advance1=15,16,18,20,22,24,26,28,30,32
advance0=15,16,18,20,22,24,26,28,30,32
cylinders=4
userOutMode3=0
userOutMode2=0
userOutMode1=0
userOutMode0=0
shiftLight=18
userOutValue3=14
userOutValue2=13
userOutValue1=12
userOutType3=1
userOutValue0=10
userOutType2=1


Danozeman - 12/8/10 at 06:21 AM

I have this one on my 1.8. Works very well.

Linky to autosports


snapper - 12/8/10 at 06:40 AM

Unc's map looks like a 2d base map set with a 2000 rpm red and the load bins for a turbo, will get you running but only to run the engine in and drive to a Rolling Road.
A normally aspirated engine will run between vacuum and full atmospheric which according my Ap is 14.7 psi or 101.5 KPI

[Edited on 12/8/10 by snapper]


snapper - 12/8/10 at 06:45 AM

The load bins are set to 220 KPI max so over half the map will not be seen


tocca - 12/8/10 at 08:52 AM

thanks guys. I just need something to get me upto rolling road, setup then i can play some more. The rolling road guy aint got a clue with megajolt so i need to sort it before hand


contaminated - 12/8/10 at 09:45 AM

I have a decent map for that setup, and the rolling road printout with a car running on it. Drop me a U2U.

Dan


atspeed racing - 12/8/10 at 09:47 AM

i did post up a screenshot on the forum somewhere of an ignition map people could use. at least good enough for a good base map and to get the car driving.

- colin.

[Edited on 12/8/10 by atspeed racing]


snapper - 12/8/10 at 12:52 PM

If you take a laptop with Megajolt tune on it, and a disc to upload to there computer, then for the rolling road it should be no different to any the programable ECU