LocostBuilders - powered by XMB

Clutch adjustment Zetec/MT75

cortez - 17/11/14 at 09:25 PM

Has anyone a recommended pedal height at bite for the clutch?

I've set all the pedal heights but the bite of the clutch was about 10/20mm from the floor. Once I adjust the clutch to the desired bite height, the pedal height increased to about 20mm above the others!

I'm sure this is a common issue with a cable clutch setup. I have no adjustment at the pedal end and was considering fitting one.

I'd be grateful for any advise..........................................Thanks.

turnipfarmer - 18/11/14 at 02:59 PM

u2u sent

JAMSTER - 18/11/14 at 06:47 PM

did you fit the taller release bearing

cortez - 18/11/14 at 08:10 PM

quote:
Originally posted by JAMSTER
did you fit the taller release bearing

No, I have the GBS extended clutch arm pin.