Board logo

ZX14/ZZR1400 engine measurements/drawing
Niels - 12/5/16 at 02:27 PM

Hi guys,

I'm at the stage of designing and manufacturing the exhaust manifold for my MK Indy. Therefore I was wondering if there are any measurements available from the exhaust manifold that I could use? I could actually measure the engine outlet ports for the flanges, but I guess that the measurements are already available and that my measurements would not be as exact as desired.

Is there someone who has these dimensions or maybe even a cad drawing available from a Kawasaki zx14?


Greetings,
Niels

[Edited on 12/5/16 by Niels]

Johneturbo - 12/5/16 at 03:09 PM

Great choice of engine, not much help, but i used the original manifold that came with the engine and cut it up and re welded it. i'd imagine someone like Andy Bates @ AB would know

Niels - 12/5/16 at 08:55 PM

quote:
Originally posted by Johneturbo
Great choice of engine, not much help, but i used the original manifold that came with the engine and cut it up and re welded it. i'd imagine someone like Andy Bates @ AB would know


Thanks, unfortunately I don't have the original manifold so that won't be an option unless I would buy one and modify it.