Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: master cylinder wanted 64677686..mk2 escort ?
striker-4age

posted on 9/4/12 at 10:13 PM Reply With Quote
master cylinder wanted 64677686..mk2 escort ?

hi there

looking for a replacement master cylinder...i think mk2 escort ? part number on side is 64677686.0261g



anyone out there got one in there garage ?


thanks

striker-4age

View User's Profile View All Posts By User U2U Member
Dick Axtell

posted on 10/4/12 at 08:16 AM Reply With Quote
quote:
Originally posted by striker-4age
...i think mk2 escort ? part number on side is 64677686


......is the casting p/n, not the mcyl assembly. Casting could be used on other (similar) mcyls. Will check for appropriate ID p/n. Was there a plastic band on your example? That usually carries the p/n.





Work-in-Progress: Changed to Zetec + T9. Still trying!!

View User's Profile Visit User's Homepage View All Posts By User U2U Member
striker-4age

posted on 10/4/12 at 05:40 PM Reply With Quote
no mate there is no band with the part number
View User's Profile View All Posts By User U2U Member
nilocp

posted on 10/4/12 at 08:28 PM Reply With Quote
Can you put a pic on? Was this for an Escort with or without a servo? Do you know what the split is front to rear?

I may be able to help!!

Colin

View User's Profile View All Posts By User U2U Member
striker-4age

posted on 10/4/12 at 10:11 PM Reply With Quote
hi colin u2u sent

thanks
striker-4age

View User's Profile View All Posts By User U2U Member
Dick Axtell

posted on 11/4/12 at 08:27 AM Reply With Quote
Hi -

Suggest you try finding Fiesta XR2 non-boosted mcyl 74066105. For external ID, casting no should be 74660186 or 74660205. These are 19.0mm bore; check if this will be sufficient for your caliper requirements.





Work-in-Progress: Changed to Zetec + T9. Still trying!!

View User's Profile Visit User's Homepage View All Posts By User U2U Member
striker-4age

posted on 12/4/12 at 04:55 PM Reply With Quote
hi mate

is the xr2 one a two pipe cylinder ?

thanks
striker-4age

View User's Profile View All Posts By User U2U Member
Dick Axtell

posted on 12/4/12 at 07:14 PM Reply With Quote
quote:
Originally posted by striker-4age
is the xr2 one a two pipe cylinder ?

Its an ASAS, dual-circuit mcyl, if that's what you mean.





Work-in-Progress: Changed to Zetec + T9. Still trying!!

View User's Profile Visit User's Homepage View All Posts By User U2U Member
striker-4age

posted on 12/4/12 at 09:23 PM Reply With Quote
hi again

i need one with 2 outlets only : 1 for front brakes and 1 outlet for the rears. is this what the xr2 cylinder has ?

sorry for all the questions


thanks

striker-4age

View User's Profile View All Posts By User U2U Member
Dick Axtell

posted on 16/4/12 at 05:17 PM Reply With Quote
Hello Striker,

Been away over weekend, & just picked up your posting. AFAIR the XR2 mcyl may have 4 outlets, because vehicle has X - split brake system. This means that LH front is connected to RH rear, and RH front is connected to LH rear. Ford used the mcyl to make the connections, to save themselves having to spend money on extra connections.

Should you need to, unwanted ports can be blanked off, either with a bleed screw, or by using a sutably-sized ball-bearing, locked in place with a spare tube nut.





Work-in-Progress: Changed to Zetec + T9. Still trying!!

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.