Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: identify please
Mark100

posted on 25/6/15 at 11:54 PM Reply With Quote
identify please



can you tell me what chassis this is i bought a car for parts as it had loads of good stuff but was far from iva standard ( not even close ) so i dont feel guilty about braking it the comunity has not lost anything

the chassis itself looks like a pro job that has at some point had a bike engine im guessing by the frame that came with it it then got sold to a numpty that put a zetec in it badly hes done a couple of brake brackets that hes glued on but the basic structure is good
thought id ask the mega mind on here someone should no as ive no clue

the chassis has roundbar crossbraces and a diffrent from haynes ( my build ) ford 7icnh carrier


















View User's Profile View All Posts By User U2U Member
wylliezx9r

posted on 26/6/15 at 04:40 AM Reply With Quote
Caterham?





I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best

View User's Profile E-Mail User View All Posts By User U2U Member
kj

posted on 26/6/15 at 06:25 AM Reply With Quote
Any vin number s ?





Think about it, think about it again and then do it.

View User's Profile View All Posts By User U2U Member
femster87

posted on 26/6/15 at 07:34 AM Reply With Quote
quote:
Originally posted by wylliezx9r
Caterham?


Dont believe Caterhams have IRS

View User's Profile View All Posts By User U2U Member
INDY BIRD

posted on 26/6/15 at 07:46 AM Reply With Quote
also caterham are top mounted peddle box this is not caterham for sure,

looks like locost type of chassis,

View User's Profile View All Posts By User U2U Member
micksalt

posted on 26/6/15 at 07:46 AM Reply With Quote
quote:
Originally posted by femster87
quote:
Originally posted by wylliezx9r
Caterham?


Dont believe Caterhams have IRS


Except the CSRs, but I doubt Caterham would have allowed one designed for a bike engine to leave the factory.

View User's Profile View All Posts By User U2U Member
Mark100

posted on 26/6/15 at 08:48 AM Reply With Quote
No vin numbers or marking of any kind
was just going to put on the bay as a start for someone's project if I can find what it is so I can say but if you boys haven't got a clue think im stuck

View User's Profile View All Posts By User U2U Member
danmalkin

posted on 26/6/15 at 11:35 AM Reply With Quote
It's definitely not a caterham.
View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 26/6/15 at 11:38 AM Reply With Quote
Luego did an IRS chassis for their Locost but it isn't one of theirs. Just a thought if you brought it as a complete car did you get a V5? , that may help

[Edited on 26/6/15 by rusty nuts]

View User's Profile View All Posts By User U2U Member
40inches

posted on 26/6/15 at 11:59 AM Reply With Quote
Doesn't the RV8 engine have staggered engine mounts like that? Would also explain the cut out chassis member.
View User's Profile View All Posts By User U2U Member
kj

posted on 26/6/15 at 01:16 PM Reply With Quote
Westfield ?

What part of the country did you buy it, if you don't mind me asking?

[Edited on 26/6/15 by kj]





Think about it, think about it again and then do it.

View User's Profile View All Posts By User U2U Member
kingster996

posted on 26/6/15 at 02:25 PM Reply With Quote
quote:
Originally posted by kj
Westfield ?


Nope - only the pre-lits had the sloped passenger/driver side rails and they were all live axle.

[Edited on 26/6/15 by kingster996]






I used to be indecisive, but now I'm not so sure

View User's Profile View All Posts By User U2U Member
kj

posted on 26/6/15 at 02:47 PM Reply With Quote
Good point, iam sure i have herd about this chassis in the past.





Think about it, think about it again and then do it.

View User's Profile View All Posts By User U2U Member
Slimy38

posted on 26/6/15 at 06:16 PM Reply With Quote
To me that looks like a Haynes base with builder mods. The reason is that I remember seeing a post on here from someone about the pros and cons of round tube for the diagonals and tunnel. I don't think it's a particular manufacturer.
View User's Profile View All Posts By User U2U Member
leon51274

posted on 26/6/15 at 07:02 PM Reply With Quote
I've seen marks chassis and it smaller than a haynes more like dims of a ron champion but it certainly doesn't resemble a ron champion based chassis as i had one a good few years back to compare.
View User's Profile View All Posts By User U2U Member
Mark100

posted on 21/8/15 at 06:53 PM Reply With Quote
Free to good home

ive managed to identify this as a locust chassis
its now in the way as im putting mine together on the driveway
so free to good home or ill have to cut it it up to get some more room

View User's Profile View All Posts By User U2U Member
MikeRJ

posted on 21/8/15 at 08:25 PM Reply With Quote
quote:
Originally posted by Mark100
ive managed to identify this as a locust chassis


The Locust uses a ladder chassis, not a spaceframe like this.

The bent tube triangulation at the front of the engine bay looks very familiar, but I just can't remember where I;'ve seen it before.

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.