Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Any SSC stylus owners here?
number-1

posted on 8/6/19 at 09:27 PM Reply With Quote
Any SSC stylus owners here?

Is anyone else an SSC stylus owner? I picked a supercharged zetec engined one up last night
View User's Profile View All Posts By User U2U Member
Nile_rt

posted on 8/6/19 at 10:08 PM Reply With Quote
Nice. I think I know which car you have. Is it blue?

I'm still building my RT. Have so much to do and so little timep

View User's Profile View All Posts By User U2U Member
number-1

posted on 8/6/19 at 10:55 PM Reply With Quote
Hahaha...yes...its blue!!!!
View User's Profile View All Posts By User U2U Member
wonderfulweasel

posted on 9/6/19 at 06:18 AM Reply With Quote
I'm also building one currently.

Look forward to pics of your new toy!

View User's Profile View All Posts By User U2U Member
ianminki

posted on 9/6/19 at 09:42 AM Reply With Quote
ssc stylus

hi
yes I have a stylus classic first reg in 2002 1600 x flow and still altering it

View User's Profile E-Mail User View All Posts By User U2U Member
se7ensport

posted on 9/6/19 at 02:44 PM Reply With Quote
Built mine in 2006 and still improving it

Stylus 2
Stylus 2


[Edited on 9/6/19 by se7ensport]

[Edited on 9/6/19 by se7ensport]

View User's Profile View All Posts By User U2U Member
Shooter63

posted on 9/6/19 at 04:23 PM Reply With Quote
Yup 2.0l Zetec, currently being turbo charged

Shooter

View User's Profile View All Posts By User U2U Member
Schrodinger

posted on 9/6/19 at 04:39 PM Reply With Quote
Yes 1.8 zetec and like everybody else still playing with it.





Keith
Aviemore

View User's Profile E-Mail User View All Posts By User U2U Member
Paul M

posted on 9/6/19 at 10:39 PM Reply With Quote
2.0 zetec - originally 1600xflow - currently converting from bike throtle bodies to omex/jenvey bodies -SORN 6
years so painfully slow progress





SSC Stylus 2.0. Blacktop, Omex
ECU & Bodies

View User's Profile View All Posts By User U2U Member
number-1

posted on 9/6/19 at 11:07 PM Reply With Quote
Thanks for the replies chaps. I will get some pics of mine uploaded if it ever stops raining!!!

se7ensport....... we need to talk mate! That is a sexy car! Is that roll bar higher than standard?? The splitter, the wheels, the mirrors........talk to me

Im 6'1 and need to gain some head room so my bald noggin isnt above the roll bar. Im getting JK composite seats to lower me a bit but will need a taller roll bar, but ideally will work with the original roof, or with minor mods, Seats.....what seats are you using as they look pretty low?

Ive got loads of questions for you all so sorry in advance I wont bore you too much just yet with them all

Ohhhh before i go to bed.......where do i get a car cover for the Stylus? The off the shelf ones all seem to big?

[Edited on 9/6/19 by number-1]

View User's Profile View All Posts By User U2U Member
se7ensport

posted on 10/6/19 at 08:27 AM Reply With Quote
Quick summary: CXR 13” wheels, Lifeline MSA mirrors from Merlin Motorsport, cage is by Caged/ Cyclone Racing in Radstock, it’s too tall for a standard hood by approx 4”. It has Jk seats, drivers on a runner and passengers bolted floor and bulkhead.

If you are planning to compete or just do trackdays you’ll need a very large silencer, mine is 6” diameter and only just gets under 103 at 3/4 red line.

I’ve wanted to supercharge mine for a while, but Duratec kits are bloody pricey and don’t fit in my available space so lots of mods required.

Stylus 3
Stylus 3



Stylus 4
Stylus 4



[Edited on 10/6/19 by se7ensport]

View User's Profile View All Posts By User U2U Member
number-1

posted on 10/6/19 at 11:47 AM Reply With Quote
Cheers for the reply mate.

Does the passenger seat not need lifting to get over the chassis member that goes across the width on the floor pan? The car is for trackdays.

View User's Profile View All Posts By User U2U Member
se7ensport

posted on 10/6/19 at 12:29 PM Reply With Quote
My car has a lowered seat bar on the drivers side; it’s flat on the interior of the car.

Passenger bar is the same as yours, but the style of seat clears it easily.

JK Seats
JK Seats

View User's Profile View All Posts By User U2U Member
number-1

posted on 10/6/19 at 06:54 PM Reply With Quote
Ahh yes, that makes sense now with the seat picture. I will end up using them for driver and passenger then an bolt to the floor. Do you know what the widest seats are that fit from JK?
View User's Profile View All Posts By User U2U Member
se7ensport

posted on 10/6/19 at 07:16 PM Reply With Quote
I’d makes cardboard template, suspect the widest would fit, might need the outside edge that mounts to the floor fettling, but that is the narrowest point. Without runners to worry about it’s pretty easy to go wide as you can overlap with the inner rail if needed.
View User's Profile View All Posts By User U2U Member
number-1

posted on 11/6/19 at 11:54 AM Reply With Quote
Would that still work if i fit straight to the floor and not on runners? Would they still be tall enough to get over the inner rail?

I'm waiting for a call back from a JK engineer to see if he knows what seats would fit without too much messing

View User's Profile View All Posts By User U2U Member
se7ensport

posted on 11/6/19 at 08:56 PM Reply With Quote
I have 40cm seats fitted, looks like 42 would fit with a trim to the floor mount. I can’t see runners working on a seat that wide without the rear also being raised; otherwise when you move the seat forward it will rise in height.

Jk seat 40
Jk seat 40

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.