Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Time I brought these back
Triton race seats

posted on 3/8/20 at 01:07 PM Reply With Quote
Time I brought these back

Perhaps some will of seen my eBay listing for seats perhaps not, but not to worry eBay is a fruit cake of a place at the best of times 🙄.
Triton seats along with other things will be back in full time production in September.

Cheers
Mark

View User's Profile View All Posts By User U2U Member
bi22le

posted on 3/8/20 at 01:28 PM Reply With Quote
Do you do thinner seats for JPSC chassis?

I think they need to be 390mm max width at the bottom.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
JC

posted on 4/8/20 at 09:50 AM Reply With Quote
Welcome back Mark!
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
mikeb

posted on 4/8/20 at 02:28 PM Reply With Quote
He's back, hope the shoulders holding up!
Heads up, its got pretty quiet on here, you need to hit up the facebook and whatsapp groups to be down with the kids nowadays. I can't follow anything on them though as its just one big long conversation where topics and questions are gone so quickly.

View User's Profile View All Posts By User U2U Member
Deckman001

posted on 4/8/20 at 03:32 PM Reply With Quote
Welcome back Mark !!

I've still got two of your fabulous seats from the original build ten years ago, one fared better than the other although i don't think anyone's seats could take being hit with lengths of 4 x 2" timber on the thin shoulders So you may well get a request about repairing the top thin shoulder area on one of them at some point

Jason

View User's Profile View All Posts By User U2U Member
number-1

posted on 4/8/20 at 05:48 PM Reply With Quote
Mark, any pictures of your seats?
View User's Profile View All Posts By User U2U Member
MikeR

posted on 5/8/20 at 08:54 AM Reply With Quote
Welcome back.

I've still not finished my car that you made some wishbones for (cough)20(cough) years ago.

Their had been a couple of questions about body work recently. If you've got moulds you may get some business from them. Their is on Facebook someone doing seats in Europe somewhere. You might want to check them out to ensure you're competitive.

View User's Profile View All Posts By User U2U Member
Triton race seats

posted on 7/8/20 at 01:16 PM Reply With Quote
Oh blimey Mike, I thought Iíd become dreckly after living in Cornwall for the past 15 yrs 🤣.
Shoulder behaves itself these days after two operations and proved it would stay where itís supposed to after nearly three years making full size replica Spitfires.
I donít have moulds for bodywork anymore but as the saying goes ď never say neverĒ

View User's Profile View All Posts By User U2U Member
MikeR

posted on 7/8/20 at 02:38 PM Reply With Quote
"full sized replica spitfires" - you can't post that on here without some pictures
View User's Profile View All Posts By User U2U Member
Triton race seats

posted on 7/8/20 at 04:37 PM Reply With Quote
Photos of planes are on my phone so Iíve no idea how Iíd post them here 🤔
View User's Profile View All Posts By User U2U Member
Deckman001

posted on 7/8/20 at 05:24 PM Reply With Quote
quote:
Originally posted by Triton race seats
Photos of planes are on my phone so Iíve no idea how Iíd post them here 🤔


Mark, edit the pics on your phone down to 2MB sizes then email them to your desk top email account then save to your pictures file on your comp, then in your photo archive on here, just upload the ones you want to let us drawl over

Jaon

View User's Profile View All Posts By User U2U Member
thelivo

posted on 28/9/20 at 09:15 AM Reply With Quote
Hey Mark,

Might be looking at some of your seats, just waiting for my kit to turn up in a few weeks so I can measure the size accurately. Can you supply or recommend padding sets as well?

Thanks
Dave

View User's Profile View All Posts By User U2U Member
James

posted on 28/9/20 at 11:57 AM Reply With Quote
Hi Mark,

Good to hear you're still alive and kicking!

Good luck with resuming the business!





------------------------------------------------------------------------------------------------------------

"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights." - Muhammad Ali

View User's Profile View All Posts By User U2U Member   James 's Aim
Triton race seats

posted on 28/9/20 at 12:59 PM Reply With Quote
Oh Iím afraid Iím still alive and talking gibberish most of the time despite being an old git 🤣
New premises provides more scope and allow a clean area ( if thatís actually possible for me &#129396 for making the seats (amongst other things) in carbon fibre so once things are sorted I will post some pictures.
Initially the seats will only be the shell in carbon fibre with the base in woven cloth With a tissue finish.
Iím aiming to create a new mould for the back/base that will allow a completely carbon fibre seat.
Oh and when I can get my head around it there will be a website

Oh and a fit of something Iím not sure what but new company name is
Nookie Composites Ltd but seats will still be Triton Seats
Cheers
Mark

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.