scootz
|
| posted on 17/7/07 at 08:30 PM |
|
|
04 - 06 R1 Engine Cradles / Mounts for a 7
Does anyone have any drawings of their cradle / mounts? Is there a 'kit car standard'?
Cheers
Scootz
[Edited on 19/7/07 by scootz]
|
|
|
|
|
bpgoa
|
| posted on 17/7/07 at 09:03 PM |
|
|
i posted help when i went to fit my zx10r engine into my book chassis. the best advice anyone gave me was to talk to MK... they were fantastic, and
didn't mind that it was not one of their chassis...
If it will help then have a look at my pictures on facebook ... search for Adrian.hughes@talbotuw.com.. there should be a few hints... and yes... i
do have OCD ...
On and On the River flows... We the Undertow
|
|
|
scootz
|
| posted on 17/7/07 at 09:09 PM |
|
|
How strange... so do I?
|
|
|
scootz
|
| posted on 18/7/07 at 09:00 AM |
|
|
Can't get on to Facebook - anyone else have any drawings or pics they can share with me?
|
|
|
scootz
|
| posted on 18/7/07 at 11:13 AM |
|
|
Please!
|
|
|
Bob C
|
| posted on 18/7/07 at 04:34 PM |
|
|
I didn't use a cradle & rubber mounted it.
Nice to not get vibration white everything...
http://freespace.virgin.net/bob.carter/images/engmntfr.jpg
http://freespace.virgin.net/bob.carter/images/engmntri.jpg
http://freespace.virgin.net/bob.carter/images/engmntrr.jpg
So you have options.....
Bob
|
|
|
jacko
|
| posted on 18/7/07 at 08:42 PM |
|
|
I know the engine is not a r1 but if you look at Roadrunner's photos there is a cradle i made for him [zx9r]
It may help you with ideas
Jacko
|
|
|
scootz
|
| posted on 18/7/07 at 09:04 PM |
|
|
Cheers chaps... keep em coming!
|
|
|
scootz
|
| posted on 20/7/07 at 07:19 AM |
|
|
Could still do with some more pics of the mounts and/or cradles that folks have used to fit their R1's.
|
|
|
whpracer
|
| posted on 24/7/07 at 08:22 PM |
|
|
hey scootz,
some pics of an '04 r1 cradle on my site
www.sevenracing.nl
good luck
|
|
|
ChrisGamlin
|
| posted on 24/7/07 at 08:33 PM |
|
|
Here's my 03 engine mounts
 
R1 Engine Cradle
 
R1 Engine Cradle Front
A slightly different engine to the 04 but I think the mounting pickup points are reasonably similar.
|
|
|
JoelP
|
| posted on 24/7/07 at 08:43 PM |
|
|
yours is similar to how i usually do mine chris, a pair of spars bolted down and a couple of mounts on the chassis direct.
|
|
|
