I've got a 6 pint, manual valve, Accusump in silver going spare.

I was going to fit it to my current project tin top but decided at the weekend it was not going to fit comfortably in the engine bay. So I've ordered a sump baffle kit instead this morning.

I've tested the internal valve at 60 psi for a couple of days as described in the manual and it's been sat at 10 psi (the normal setting) since so no leaks. The only blemish is the needle on the gauge has gone a bit wonky where it's been returning to the pin stop but you can remove the glass front and straighten it quite easily if it gets worse.

I'm including the 6 pint accumulator, manual valve, two mounts and some 1/2 inch hose and AN alloy fittings.

£150 delivered by UPS

email ukbimble@yahoo.co.uk for more details or post on here for dibs.

Sorry for the crap phone pic I'll upload a better one tomorrow


6 pint Accusump

I'll take it, thanks

u2u'd

Looks like Brett will get this pending payment.

Bum .lol 2nd dibbies then

[Edited on 2/12/13 by CRAIGR]

quote:

---

Originally posted by CRAIGR
Bum .lol 2nd dibbies then

[Edited on 2/12/13 by CRAIGR]

---