MK Indy Classic Rolling Chassis Parts Package with Alloy wheels, Spax shocks, sierra differential and prop shaft for either bike or car engine, brakes, steering column, floor pan, full body kit.....

This chassis has an engine cradle for a bike engine already installed, so if you want to go bike engine, then it's ready to go.
Also included (if you don't want BEC) is a Ford Sierra 2.0 DOHC engine, MT75 gearbox, ECU, wiring loom, Exhaust manifold and propshaft.

If you want to remove the bike engine cradle and convert this into a car engine car, then there's an engine package there too.

This parts package also comes with FULL bodywork in black
2x Side Panels
1x Nose Cone
1x Bonnet
1x Scuttle Panel
1x Rear Panel
2x Rear wheel arches

There is also a huge parts bundle not already mentioned including radiator, radiator brackets etc.

We've done a video which is available on our youtube channel so you can see exactly what's available
https://www.youtube.com/watch?v=-Fk1YIPxao0

This is available in our workshop in Rayne, Essex CM77 6TE
0203 432 2679 or mail@mksportscars.com

We can also offer a delivery service at a cost of £1 per mile (round trip from the workshop)

£3995 for the full package

Ideally would like to sell everything in one go, but might consider splitting if it helps.

[Edited on 10/9/20 by kitcardirect]

I would take the bonnet and possibly the nose cone if you were to split it

quote:

---

Originally posted by wrayvon
I would take the bonnet and possibly the nose cone if you were to split it

---

Trying to find a 2nd hand one first but if I can't, I will!

Now Sold

not surprised, there was a hell of a lot included