NS Dev
|
posted on 12/5/13 at 06:25 PM |
|
|
9" gas pipe
anybody know where I can get hold of an offcut of 9" underground plastic gas pipe? (or any 9" polyethylene pipe with decent wall
thickness.
Kicking myself as transco were operating roadworks out of the yard at work for months and had heaps of offcuts when I didn't need them!!
[Edited on 12/5/13 by NS Dev]
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
trextr7monkey
|
posted on 12/5/13 at 06:38 PM |
|
|
Find the Transco depot a lot of the stuff seems to go back to skips there we went to local spot and blagged 4' to make a santa's post box
for school kids they actually chopped a bit off a new length!
Good luck
Mike
http://www.flickr.com/photos/14016102@N00/ (cut and paste this dodgey link)
Our most recent pics are here:
http://s129.photobucket.com/albums/p211/trextr7monkey/
|
|
NS Dev
|
posted on 12/5/13 at 06:39 PM |
|
|
cheers, will try and find where the closest depot is!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
Peteff
|
posted on 12/5/13 at 07:14 PM |
|
|
I think they only do 8" or 10" near the size you are looking at.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
NS Dev
|
posted on 12/5/13 at 09:34 PM |
|
|
10 would probably do the trick
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
dave r
|
posted on 13/5/13 at 05:37 AM |
|
|
how long is an offcut ?
I'd love to give my imaginary friend a great big hug,
but this jacket makes it impossible.
|
|
NS Dev
|
posted on 13/5/13 at 01:25 PM |
|
|
good point! A metre would be great
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|