ricklawn
|
posted on 3/1/07 at 05:26 PM |
|
|
Kit car workshop
does anyone know what is happening at kit car workshops? web site has been down for about 2 weeks and nobody is answering the phones
|
|
|
fishywick
|
posted on 3/1/07 at 05:36 PM |
|
|
The owner, Martin, was involved in some sort of road accident and has been in hospital. Don't know much more than that but that's the
reason.
|
|
DIY Si
|
posted on 3/1/07 at 06:47 PM |
|
|
Afraid to say, although I don't know the legal position that my mate no longer has a job there. He was laid off just before xmas. I think it was
a choice between Martin's health after his accident and the business.
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
dave-69isit
|
posted on 3/1/07 at 06:50 PM |
|
|
kit car workshop is that not gts owned
|
|
chriscook
|
posted on 3/1/07 at 07:04 PM |
|
|
I know some people here are on the Sylva List and will have seen Mark Fisher's post which has an update on Martin's condition. I'm
not sure if i should post it all on here or not, but he was involved in a car accident back in October and was admitted to hospital again and had an
emergency operation in December. He is apparently making a good recovery and they are doing all they can to minimise disruption.
They are completely unrelated to GTS at least as far as i know.
|
|
DIY Si
|
posted on 3/1/07 at 07:11 PM |
|
|
I think Martin owns Fisher Sports Cars as well, so nowt to do with GTS. The last I heard Martin had an emergency op and is busy recovering from that.
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
chriscook
|
posted on 3/1/07 at 07:15 PM |
|
|
He does indeed own Fisher Sports Cars. Mark Fisher (the previous owner of Fisher) is doing some workshop stuff in the South East to help out
apparently.
|
|
flak monkey
|
posted on 3/1/07 at 07:20 PM |
|
|
kitcarbuilds is the GTS company some are thinking of, totally unrelated.
David
Sera
http://www.motosera.com
|
|
DIY Si
|
posted on 3/1/07 at 07:22 PM |
|
|
Any idea what's happening with the workshop? Is it shut for now, or for good? Or still unknown?
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
chriscook
|
posted on 3/1/07 at 07:25 PM |
|
|
Sounds like the workshop opening hours are restricted while they are dealing with a bit of a backlog.
|
|
DIY Si
|
posted on 3/1/07 at 07:28 PM |
|
|
Is that the Rushden workshop or the other/Fisher (?) one?
“Let your plans be dark and as impenetratable as night, and when you move, fall like a thunderbolt.”
Sun Tzu, The Art of War
My new blog: http://spritecave.blogspot.co.uk/
|
|
ricklawn
|
posted on 3/1/07 at 07:31 PM |
|
|
does anyone know where i can get a roll bar from then. as i have just bought a 98 fury without one.
|
|
greggors84
|
posted on 3/1/07 at 07:51 PM |
|
|
Try Martin at MK Engineering, he does roll bars for most things. Im sure you can get the dimensions from somewhere.
Chris
The Magnificent 7!
|
|
bracey
|
posted on 3/1/07 at 07:51 PM |
|
|
pretty sure mk engineering will be able to make you something if you take car there
|
|
chriscook
|
posted on 3/1/07 at 07:57 PM |
|
|
Martin did mine for my Phoenix
|
|
ricklawn
|
posted on 4/1/07 at 09:34 AM |
|
|
fury roll bar
cheers, i will give Martin a call
|
|
hobbsy
|
posted on 25/2/07 at 06:03 PM |
|
|
I too am considering changing the bar on my Fury. While I have spoke to Martin at MK Engineering (after reading this) he can't do anything for
about 2 weeks. So I might try KCW / Fisher down south to see if they have anything on the shelf that suits my needs.
That is assuming that they haven't change the pick up points that much over the years etc.
|
|