Board logo

jan wlm meet
theconrodkid - 17/12/06 at 07:02 PM

wheres it gunna be chaps?


James - 17/12/06 at 07:07 PM

Somewhere warm.....


....Cape Town for instance?

Could be good for a blat down there!


Cheers,
Jim


donut - 17/12/06 at 07:31 PM

Box Hill cos it's warmer inside!! May actually remember to go this time

7th Jan yes?

[Edited on 17/12/06 by donut]


bob - 17/12/06 at 08:35 PM

What date are you thinking of ?

New years day (mon) there is a club meting at Brooklands museum in weybridge,basically its a get some fresh air meet and brings out a fair amount of classic die hards.

I'll be at Brooklands anyway

I'm thinking our normal meet will be sunday the 7th,any suggestions welcome


donut - 17/12/06 at 09:50 PM

7th Jan is officially the 1st Sunday of the month so i say go with that one


theconrodkid - 18/12/06 at 08:13 AM

ill be at brooklands with bobski then,how bout the cafe at runnymead someone mentioned earlier?


Humbug - 18/12/06 at 11:45 AM

So John - you going to Brooklands with Bob on the 1st Jan and the 7th Jan???

I'm with Andy - the 7th is the first Sunday in the month. So, is it Box Hill, or Runnymede, or somewhere else?

btw, by "Runnymede cafe" do you mean the place where there is a building both sides of the road, just by the Thames on the road from Staines to Windsor?


Fozzie - 18/12/06 at 11:46 AM

quote:
Originally posted by theconrodkid
ill be at brooklands with bobski then,how bout the cafe at runnymead someone mentioned earlier?


The only cafe I do know of at Runnymede closes for winter

But honestly do not know if there is another

Probably be at Brooklands on the 1st with Bobski and Johnik then.....
Not at the 'Hill on the 7th.....

Fozzie


bob - 18/12/06 at 12:49 PM

Yes simon the tea rooms are the buildings or building you mentioned,not sure of opening times.

I'm doubtful for the hill on the 7th


Fozzie - 18/12/06 at 01:01 PM

Oooo forgot about that cafe !

linky

Hope this helps....

Fozzie


theconrodkid - 18/12/06 at 04:20 PM

yup ill do as many sundays as there are bacon rolls and people to talk at
oh and if any wlm members have a piece of bottom hose,the bit that goes from water pimp size down to normal size i,d love to take it off your hands

[Edited on 18/12/06 by theconrodkid]


bob - 18/12/06 at 07:29 PM

If i remember right and your using a olop rad the size reducer you are wanting will be 45mm from pump down to 32mmm towards rad.

There is a distinct possibillity i can help and will take a peek at my stock of crap that comes in handy now and then tomorow


theconrodkid - 18/12/06 at 07:50 PM

cheers bobski


donut - 24/12/06 at 08:52 AM

SO...is it Box Hill for the meet?


Humbug - 29/12/06 at 09:58 AM

I thought from earlier posts it was Runnymede?


GeoffT - 29/12/06 at 10:47 AM

I did check out the Runnymede cafes recently, there are actually two open on Sundays.

The first one is on the right travelling west across Runnymede, about 1/2 mile from the Egham roundabout - this has a pleasant semi covered eating area, but only limited parking by the cafe, at £1 per hour, (1st 1/2 hr free).

The second one is about a mile further on, where the two small buildings are on each side of the road. Entrance to cafe carpark is on left approx 50 yds before the buildings. This is probably more suitable as it has a fairly large parking area by the cafe, again £1 ph, though may get away with this on Sunday morning?

All irrelevent if you go elsewhere of course, I'm biased though, living only 10 mins from Runnymede.......

ATB, Geoff.


dnmalc - 30/12/06 at 12:41 AM

So where are we going then? either is Ok by me!

PS Bob did you get anywhere with the purchase of brake piping


bob - 30/12/06 at 02:25 PM

Derek

I managed to get a length of pipe from deckman (jason) probs only enough for one run though.

I went to the trade counter last week but they had run out i'll keep you posted.

I'm easy on the venue for jan 7th so make your minds up or i might just sit indoors till febuary.


Jasper - 30/12/06 at 02:37 PM

Box Hill for me - any further and I can't be arsed......


Deckman001 - 30/12/06 at 05:51 PM

quote:
Originally posted by bob
Derek

I managed to get a length of pipe from deckman (jason) probs only enough for one run though.

I went to the trade counter last week but they had run out i'll keep you posted.

I'm easy on the venue for jan 7th so make your minds up or i might just sit indoors till febuary.


Oops, sorry Bob, you should have said, I'll dig you out another bit

Jason


bob - 30/12/06 at 06:40 PM

Jason

Has anyone told you (apart from donut) what a top bloke you are

derek will be very pleased


dnmalc - 30/12/06 at 07:18 PM

Thanks Jason.
All we need now is a location


Deckman001 - 30/12/06 at 07:29 PM

If swmbo doesn't agree to a mornings pass for me, I'll drop it round to Andy as I think he's going isn't he ??
I'm off out now for a drink, so will look on here later for a decision

Jason


donut - 30/12/06 at 11:13 PM

Eh what!!

I'll be at Box Hill if that's where we are meeting. I'm not sure about the other locations as it's a bit far. If someone can post where we are actually going to be then I'll be there.


James - 30/12/06 at 11:44 PM

It's hard to enough for me to get to the right venue/time as it is!!!

So... Jan 1st is at Brooklands.... I won't be there.

Jan 7th is Box Hill (Ryka's Cafe)... I will be there.

That right?

Cheers,
James


donut - 31/12/06 at 01:19 PM

Box Hill it is then. I'll be there.


Pezza - 1/1/07 at 08:19 PM

i'll be there sunday too :


bob - 1/1/07 at 08:49 PM

I wasnt going to go to Box Hill but i just remembered i have a handbrake lever for Ben,so i might just drag myself out


Pezza - 1/1/07 at 09:23 PM

hehe cheers Bob, no rush though dude if you weren't planning on comming out.

Ben


Deckman001 - 1/1/07 at 11:17 PM

I've picked up another coil of copper from the garage so will have to make it now
Oh, and fixed the water leak on the inlet manifold and took it for a small drive, inspiration is now back 'on tap'

Jason


donut - 2/1/07 at 01:10 AM

Let me know if you want a lift J.


ned - 2/1/07 at 08:47 AM

boxhill it is


James - 2/1/07 at 11:08 AM

quote:
Originally posted by Pezza
hehe cheers Bob, no rush though dude if you weren't planning on comming out.

Ben


He's been planning it for years.... just waiting to pick the right moment to tell us!


bob - 2/1/07 at 07:13 PM

James if i could stand pain i probably would join the captain jack brigade,i'm sure it would make life easier than understanding women


Deckman001 - 6/1/07 at 10:27 PM

I'll be there, and with the coil of copper

Jason


bob - 7/1/07 at 01:11 AM

sadly i wont be there a s i will be having a nice lye in


Jasper - 7/1/07 at 02:00 PM

And I just completely forgot .........


Surrey Dave - 7/1/07 at 03:50 PM

I was snowboarding in Merstham........


donut - 7/1/07 at 11:14 PM

I actually remembered to go this time (YAY! ) a very nice meet it was too! Missed the regulars though!! You know who you are!


Pezza - 7/1/07 at 11:17 PM

Not a bad turn out for a crappy greay wet day tbh. even if there was only one seven lols


Surrey Dave - 8/1/07 at 12:19 AM

Robocog you are my hero ,you really clock up some miles in your MK , without a screen too , you make us ( the WLM) look bad!

But they are a tough lot in the Portsmouth Southampton area , I know i've played at some of their social clubs


theconrodkid - 8/1/07 at 06:21 AM

sweet pea should know the way on her own,just hear north-east


donut - 8/1/07 at 06:15 PM

But when will she be there John?