After a lot of deliberation & reflection, I've reached the difficult decision of selling up. On the plus side it means you lot are gonna be able to pick up a lot of essential components in one fell swoop..

All the sierra bits were taken from a K reg sierra sapphire with 86,000 miles on the clock. I drove the car home from west yorkshire to north yorkshire without any trouble.

I was going to put prices on all of this stuff but U2U me your offer & if it's about what I'm looking for then we'll sort something out. Small items will be posted via royal mail, larger via courier and the biggest heaviest stuff will need to be collection in person. Some of this stuff is advertised elsewhere so please don't be annoyed if it transpires that an item is no longer available once you've messaged me..

I'll be away from my computer for the rest of the day but will be on tomorrow morning so please be patient if you don't hear back from me today.

Rough as a ducks arse chassis - might make a nice climbing frame for the kids or a basis to start your build from? worth posting it just in case someone is interested but otherwise it's gonna be chopped up and scrapped...


1.8 CVH engine


Reconditioned valves (thanks to WrigglyPig aka Kev for doing these for me - I owe him some beer tokens once everything sells )


camshaft


V5 document with I.D. plates cut from the car (chassis & the 2 from under the bonnet) - Have got a picture of this but it shows my home address & the document reference number.

Type 9 gearbox


1.8 zetec silvertop - have a MASSIVE box of ancillaries & in/out manifolds for this




Re-con'd drumbrake backplates - with new cylinders


Drums


CVH stretch bolts from burton power:


Cam belt from burton power


Part of the top end gasket set (valve stem seals etc)


CVH thermostat


Sparkplugs to fit CVH


Oil filter


head gasket set


bottom end gasket set


Rollbar to haynes roadster spec (this was part of a group buy on the roadster forums a while ago)


Sierra steering colum - includes 3 keys, ignition, switchgear




Mk1 escort steering rack (mexico iirc?)



Roadster spec wishbones by 3GE (front and rear upper & lower)


threaded ends of wishbones




GSXR SRAD Carbs (600 or 750, will confirm)




SRAD carbs - TPS has a slight crack on the housing:


Zetec inlet manifold plate:


Haynes roadster differential mounts


Ford sierra differential (3.92?)


CVH inlet manifold plate


Sierra Propshaft






sierra driveshafts


Original driveshafts with drumbrakes still on the hubs



Roadster chassis plates


OMP racing steering wheel (non IVA friendly by the looks of it)


EBC greenstuff pads to fit sierra calipers


Roadster suspension brackets




Original discs and pads with loads of life left in them


Sierra dashboard (bad pic I know)


Sierra starter motor




Sierra front uprights


bits




Megajolt lite Jr. with all necessary bits






Zetec Silvertop in and out manifolds:





Build table on casters


thanks for looking

You have PM!

You have u2u re starter motor & green pads

Cheers

Rich

[Edited on 30/8/10 by RichardK]

Oh! and don't scrap the chassis if it's not bent. Even if the welds aren't all that it's no big deal to grind them and re weld. There's a lot of work in cutting all that steel not to mention the stuff doubling in price every few minutes!

It could be a good place to start for someone on a "locost" budget.

U2U sent, for the rollbar

u2u for steering column

u2u sent re megajolt

megajolt & steering column/wheel/switchgear/ignition keys now gone!

OMP steering wheel SOLD

Chassis and build table potentially sold (subject to collection this weekend)

EBC green pads and starter motor SOLD

Roll Bar potentially SOLD (awaiting payment)

Zetec, Gearbox, Diff, Driveshafts, New Drums & Slaves, Propshaft provisionally SOLD

Wishbones are now down to £300 for the lot (plus p&p)

How much for chassis and cvh?

Cheers (pm me if you prefer)

Chassis and build table gone, I'm collecting this weekend

wishbones and brackets for chassis pm sent.

Mike

It has just been brough to my attention that:

I AM A MORON

I've listed the wishbones at £300 ish but 3GE sell the same set brand new for £277 - I looked at the wrong product but with picture of wishbones on their website and saw £380 as the price for the set...

Offers for wishbones on a postcard please

PM sent re: wishbones and carbs