Board logo

STAINLESS ROLL BAR MANUFACTURER???
johnjulie - 14/8/05 at 08:17 PM

Anyone know of a company near Manchester that can make a SS roll bar, ie has bending eqpt etc.?
Cheers John

Jon Ison - 14/8/05 at 08:23 PM

MK as in Martin of MK engineering, (not MK sports cars) not too far away from you, J1 M18.

Dillinger1977 - 14/8/05 at 08:35 PM

mnr have a new 'bender'

http://www.locostbuilders.co.uk/viewthread.php?tid=28145

if its from north manc, it's probably an hour's drive away. (harrogate)

welderman - 14/8/05 at 08:59 PM

If you know what you want, i could price one up for you. Mirror Polished, stain, whatever you like. Check out my photos or even the MK Owners club website. Mines the black one on the home page.
I live near Chorley about 20 mins from center of Mancherster.

[Edited on 14/8/05 by welderman]

http://www.mkownersclub.co.uk/about_mkownersclub.htm

[Edited on 14/8/05 by welderman]

Hellfire - 14/8/05 at 11:23 PM

There is alsoBenson Exhausts they are in Manchester too.

kreb - 15/8/05 at 11:22 PM

Are stainless roll bars approved for racing? Methinks they're weaker than mild steel. Worth a consideration.

NS Dev - 16/8/05 at 09:54 AM

certainly not approved for racing

DEAN C. - 21/8/05 at 10:45 AM

I believe both Martins and MNR's benders are the same machine.
I can vouch that on Martins machine it does not leave any swage marks at all,giving a very smooth bend with no reduction at all.