Someone on the forum said about getting four magnetic clamps at a really good price (only expecting one at the price paid). These were adjustable
clamps which could be locked to any angle. I have tried searching for the post which gave a reference to the seller but I can't find it.
Also, where do you get the 1mm stainless angle grinder disks I have heard about for cutting the chassis tubing?
Please can someone enlighten me.
[Edited on 6/7/03 by andyps]
the cuttimg discs are from www.screwfix.com,probly get clamps from them as well
your in yorkshire ?
i can get the cuttin discs loads cheaper than scewfix, trouble is due to flitting i won't be at the next yorks meeting but if your in no rush
than i can take some to the next J29 or yorks meeting, hope this helps a little.
can actually get 0.8 too.
Hi,
It was me who got the adjustable clamps you are talking about. The company was WDS Ltd. http://www.wds.ltd.uk
and the part number was "WDS 5724-E952 Magnetic Variable Clamps"
I got some thin cutting discs from screwfix recently and they were just over a pound each I think. They are very good and cut fast. I bought the jig
which turns your angle grinder into a chop saw as well and it seems a bargain at the price.
HTH,
Craig.
how thin is thin ? can't see any in screwfix thinner than 2.5mm in 4 or 4 1/2", or am i just blind ? i only looked online, don't have a book fing.......
jon their 1mm and will dismember a car quicker than you can say plods commin
Thanks for the replies:
Jon - there is no hurry, I haven't created the required space in my garage to start yet, hope to see you at the August Yorks meeting though.
Craig - thanks, I will check the site.
Great help from the forum again. Cheers
I can't find any 1mm disks on Screwfix, but I have found the 1.6mm disks:
http://www.screwfix.com/app/sfd/cat/pro.jsp?id=54984&ts=27567
and the 2mm disks:
http://www.screwfix.com/app/sfd/cat/pro.jsp?id=74217&ts=27567
the 1.6 is the thin one normal are about 2.5 mm
see above, we go down to 0.8, n do they cut Jasper ???