jon_haggerty
|
| posted on 11/10/05 at 08:57 PM |
|
|
Trans tunnel clearance
To fit my gearbox i need about another inch of room at the engine end of the trans tunnel. If i move the "H" upright across into the
passenger footwell as the book suggests im assuming i would need to mount the engine slightly off centre for it to be central to the tunnel. Would
this matter?
|
|
|
|
|
ayoungman
|
| posted on 12/10/05 at 07:56 AM |
|
|
Many engine installations run with the engine off centre. My Tiger has a Pinto/type 9 with a 25mm offset. HTH
"just like that !"
|
|
|
jon_haggerty
|
| posted on 12/10/05 at 04:33 PM |
|
|
Cheers for that. My trans tunnel is about 7 and 3/4 inch and it needs to be about 8and a half for the g box to fit in enough. So i take the space from
the passenger footwell and shift the engine across? Super. Cheers mate!
|
|
|
Marcus
|
| posted on 12/10/05 at 06:05 PM |
|
|
Correct me if I'm wrong, but isn't the crossflow supposed to be 3/4" off centre?
Marcus
Marcus
Because kits are for girls!!
|
|
|
