Chassis using Sierra diff on a De Dion rear end

Not logged in [Login - Register]

LocostBuilders » Forum » Chassis » Chassis using Sierra diff on a De Dion rear end

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

Crowley

Junior Builder

Posts 6
Registered 2/7/03
Location North East
Member Is Offline

Building:

posted on 7/7/03 at 10:28 AM

Chassis using Sierra diff on a De Dion rear end

I know this is not going to be the first time that this has come up, but here goes.

I'm looking for a decent set of plans to make a chassis suitable for the sierra diff & shafts and using a de dion rear end. If possible I'd prefer a wide body (car).

I've seen the mcsorley chassis, but being american I assume its a general thing rather than specific to a particular donar (espesially european).

Any ideas or advice from those that have been there done that.

Cheers

blueshift

Posting Freak

Posts 1264
Registered 3/6/03
Location Stony Stratford, Milton Keynes
Member Is Offline

Building: steam with a grain of salt

posted on 7/7/03 at 11:17 AM

I am looking at doing the same thing at the moment. I have gathered some dedion info and will be making a CAD model and website etc about it. If you don't get what you need elsewhere soon, get in touch with me and see how I'm getting on.

LocostBuilders » Forum » Chassis » Chassis using Sierra diff on a De Dion rear end

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.