Board logo

MK grill
stuey39 - 7/2/06 at 12:22 PM

has there been any SVA probs with the sharp edges of the mk grill?

Stuart.


mookaloid - 7/2/06 at 12:25 PM

I had no problems - but I didn't fit it till after the test


Hellfire - 7/2/06 at 12:51 PM

We fitted it and temporarily covered it with mesh. Just in case


Bluemoon - 7/2/06 at 01:24 PM

In theory it would fail, as the sharp edges are contactable with the SVA sphere.

As Hellfire says, mesh stops the sphere getting near it...

[Edited on 7/2/06 by Bluemoon]

[Edited on 7/2/06 by Bluemoon]