Just a couple of pics showing the lights fitted after posting the other week about the position etc, We are pleased with them, comments please!


Cheers Mike

[Edited on 10/5/06 by mike smith1]

Pic 2

Looks the best place for them

thats the job i'm planning to do today///

looking good mike

Good luck, we measured them checked and double checked, once you have got it in your head they are in the right place its a fairly simple job really.

Mike

Very nice car!
I like the high level brake light. Where did you buy it?

High level brake light is from Staffordshire Vehicle Components ( S.V.C )

Have a closer pic some were.

Its a little bit of a pain to fit but its worth it, because its speciffically for a roll bar, you fasten it to the roll bar from the inside then attach the light unit with 2 small bolts from behind with a small spanner, will have a look for some pics.

Mike

Cheers.

Kin nice!!!!!

mike nice

just so you know I have the same shaped dash and it is a SVA failure the bottom is

Thanks i thought i'd read in one of your posts u needed some lagging, i was told by MK it passes i will double check at weekend!

Mike

I think every kit manafacturer 'reckons' there dashes are SVA Ok

of course I appreciate different SVA places diff rules but mine said it needs to curve underneath