What's the general size of the R1 engine/tranny? Nothing too exact, just general height, width, and depth. With or without exhaust is fine.

Off top of me head about a 2ft square box is enough space to allow

Yep Id go along with that although picturing it in my head makes me think it might be a bit taller than 2ft when you include the carbs / throttle bodies and a filter.

With a sausage foam filter mine hangs about an inch below the bottom chassis rail and sticks about an inch out the bonnet of a book chassis, so if you can find dimensions of the chassis / bodywork height, you could work out the engine height.

Chris

[Edited on 9/11/05 by ChrisGamlin]