Board logo

R1 engine dimensions
kb58 - 11/11/05 at 01:54 AM

I know I asked before about the general size, but now it's time to get more detailed. Anyone know where I can find some semi-detailed drawings of an R1 engine/tranny?

sgraber - 11/11/05 at 02:23 AM

And I would like some detailed (accurate dimensionally including mounting points) drawings of the Hayabusa powerplant please!

robertwa - 11/11/05 at 02:50 AM

Steve, there is a proE model of the hayabusa engine at:
hayabusa
(Don't know how accurate it is though)
I used it as a base and then modified it to somewhat represent my FJR
Rob

[Edited on 11/11/05 by robertwa]

physician - 11/11/05 at 04:55 AM

i've been folowing your builds guys, from a year now, you are my inspiration.. happy to help you,

may find what you need or part of what you need.. the hayabusa is there, as long as many other bike engine, some wiht great precision, some less...

yamaha isnt there, but since averyone say it is smaller.. it may give some idea

bike engine specs

[Edited on 11/11/05 by physician]

kb58 - 11/11/05 at 05:35 AM

quote:
Originally posted by sgraber
And I would like some detailed (accurate dimensionally including mounting points) drawings of the Hayabusa powerplant please!


Steve, try asking Dennis of dpcars, I think I remember him saying he had an accurate Hayabusa drawing...

tigris - 12/11/05 at 10:49 PM

do you need the mounting points? I can go and put a square next to the motor from different angles if you like?

kb58 - 12/11/05 at 11:09 PM

At this point, not really. Line drawings of the engine from the front, side, and top would be fantastic, but beggers can't be choosers, I'll be happy with whatever is offered. Detailed dimensions aren't needed either, other then at least one dimension so I can scale it up or down.

Rorty - 12/11/05 at 11:26 PM

If one of the R1 BEC guys would be willing to supply me with a couple of critical measurements, I'll scale a side elevation drawing I have and possibly make a crude 3D model.
Drop me an email if you can help and I'll let you know what measurements I require.

sgraber - 14/11/05 at 01:34 AM

quote:
Originally posted by kb58
quote:
Originally posted by sgraber
And I would like some detailed (accurate dimensionally including mounting points) drawings of the Hayabusa powerplant please!


Steve, try asking Dennis of dpcars, I think I remember him saying he had an accurate Hayabusa drawing...


Roger Kurt, Dennis it is.


I have some SWorks files that Rorty sent my way a while back for the R6 I believe. Thanks Rorty! But that's not the engine you are looking for and at the mo I am working on an ultra-secret hush hush can't tell you about the guy that is putting twin Hayabusas in the back of a La Bala project and he already has started... Can't say anything more... no, won't do it.

Rorty - 14/11/05 at 03:03 AM

Steve, if you follow the link that physician posted above, you'll find what you're after!