Board logo

Quaife reverse box dimensions / weight
Howlor - 28/11/05 at 08:27 AM

Hi,

Does anyone know the dimensions of the Quaife reverse box. I am actually after the height of the flange centres above the mounting base and the distance between the two flanges. Also just out of interest does anyone know the weight of these?

Thanks

Dillinger1977 - 28/11/05 at 08:38 AM

im going to take a randomish stab at 5-10kg?
cant be sure as mine is fitted but its fairly heavy to lift for such a small thing!

ps my reverse box has actually been fitted to your chassis as far as i recall, if its a case of wondering if the propshafts fit.

i'll try and get some dimensions tonight.

ChrisGamlin - 28/11/05 at 08:58 AM

The figure usually mentioned is ~10kgs, not sure how accurate that is though or how it varies with different designs.

Howlor - 28/11/05 at 09:51 AM

quote:
Originally posted by Dillinger1977
im going to take a randomish stab at 5-10kg?
cant be sure as mine is fitted but its fairly heavy to lift for such a small thing!

ps my reverse box has actually been fitted to your chassis as far as i recall, if its a case of wondering if the propshafts fit.

i'll try and get some dimensions tonight.


Graham told me that he had drilled the chassis etc using your box so it should be a perfect fit. I am currently looking at all options and therefore needed the above sizes. At 10kg it is fairly heavy.

Tralfaz - 28/11/05 at 11:09 AM

http://www.quaifeamerica.com/downloads/ga/ga_35G1.pdf

Howlor - 28/11/05 at 12:31 PM

Thanks. I have downloaded the drawing and it gives me everything I need.