I'm trying to work out how to add hazards, fog lights and brake test to my R1 loom which I have extended for all other lights etc. without the use of a Vicky Greenloom or anything else. After trying to work it out from the Haynes Sierra manual, I've drawn a blank and need help. Somebody out there must have done this. Some wiring diagrams would be a great help.

Cheers, Kurt

For your Fog light just take a wire from the fused 12V, say from the headlight switch, wire through a fog light switch, to the fag lamp and then to ground. easy.

http://hellfire.locostsites.co.uk/hazard_circuit.jpg

this is off hellfire website if any help to you, although the only comment about it would be i wouldnt put the warning lights in series

looks complicated but if youve got indicators working already its just a case of making both indicator circuts with one switch



[Edited on 25/2/06 by k33ts]

Do I not need a relay rather than take the power through the switch for the fog light, or is this not necessary? I'm just checking I'm no expert.

depends what sort of switch your using but normaly it will be ok without a relay just a fused supply nomaly from headlights so the fog only works when the lights are on a single 21w bulb will draw less than 2amps