Board logo

speedohealer
kev R1 - 28/3/06 at 08:01 PM

anyone had anyone experience with 'speedohealer' looks a bit fiddly to use,any help would be greatly appreciated,cheers,kev


INDY BIRD - 28/3/06 at 08:19 PM

no piece of cake to use plug in and then just use a sat nav or a friend driving next to you to get your speedo reading verse the acurate reading.

Than go on there web site and type in the numbers on there calculator.

you will then get a list of no to type in and hey presto done.

must say mine works very well and is accurate.

also + point has a top speed indicator.

top product.

sean


kev R1 - 28/3/06 at 08:30 PM

any tips on hoe to use? doesn't seem to be lighting up or anything, only a row of switches?


INDY BIRD - 28/3/06 at 08:34 PM

a small red light should come on and flash which is the button you press to change the % ratio that the speedo is out. this also does the top speed indicator.

it should just plug into the harness i think from the speed sensor from memory, double check connections i suppose but self explanitary to connect.

not sure otherwise sorry.


INDY BIRD - 28/3/06 at 08:36 PM

sorry aslo have you been on web site speedo healer.com may help with tips on problems.