after being tempted to the dark side, i'm going to fit a bike engine in my car(ST Locost) have sourced an engine, and can strip whatever parts i need from the bike aswell,have i missed anything from the list below??

Engine
c/w Starter/alternator/Throttle Bodies/injectors/fuel rail/throttle+clutch cables

Wiring Loom
c/w ECU/Reg rec/Coils/Clocks/Switchgear/Ignition switch+key/starter relay/fusebox/clutch switch/sidestand switch/sensors

Radiator with fan
expansion tank

Exhaust Headers.

Fuel Pump/Filter/Pressure Regulator.

Speedo Sensor

anything else that would be useful??

cheers
Ray

[Edited on 27/4/06 by rayward]

[Edited on 28/4/06 by rayward]

starter relay, fuse box, all sensors for loom, side stand switch, clutch switch..

added to the list,

cheers

youve listed most

switch gear will make wiring so much easier

as you know

fuel sender out tank otherwise youll get a fault code

quote:

---

Originally posted by zxrlocost
fuel sender out tank otherwise youll get a fault code

---

my r1 gives a fault code if the fuel sender isnt plugged in

Depending which bike engine, you may also want the fuel pump. Some in tank pumps don't require a return feed

Phil

added those bits on too.

ta

Ray