Noticed last week when at Brands Hatch that the oil temp on the blade got quite high, I think the max it went to on the digidash was 116deg.

Just wondering if anyone has bothered or needed to fit an oil cooler to their blade.

ta,
Rich.

not found the need yet rich where is your oil temp sender mounted as mine never shows anywhere near that hot

demon tweeks do oil cooler kits for about £150, i got one for my pinto engine from there, good service to....

Mounted in the sump, most of the time it seemed to sit in the mid 90's but did rise to well over 100 at the end of a couple of sessions.

I didnt need to on my blade but a couple of friends have fitted them in their Westies. Id recomend having a chat to Think Automotive.