can anyone email me a 03 r1 wiring diagram? hattonadrian@fsmail.net thanks

I have a whole R1 manual I got from the internet - I'll check it when I get home tonight and let you know the year it's for (it has wiring diagrams as well as some general service information from what I can remember)

I have the Supplementary Service Manual for 2000 - 2002 (I think) R1 (4XV1 - AE2 models). It has a full wiring diagram at the back (black and white). If it's of use, let me know, I'll send it across to you.

There's some handy info here
I don't think there's a great difference between the 02 and 03.

Martin.

Id try and get hold of the updated (not 1st edition) Haynes manual if I were you, as the diagrams in the US sourced manuals you can find online are only about 90% right for UK spec bikes in my experience. There was a scan of the wiring diagram floating about somewhere so would be worth a search.

Chris

hi chris, i brought a new manual today, i wired it as per the diagram and the stater motor came on permanently? (trouble with haynes dosnt show pin no.s on plugs)the wires im stuck on are on my other thread if you could have a look please! ive changed my wiring back to how it was (fuel pump primes engine crancks but no spark? ithought i had bypassed clutch ,Blue/yellow to two black /yellow wires with black wire to ecu joined with them aswell, connected sidestand blue/black direct to earth,HHHELP!!

It sounds like you are in the same position as I was a few weeks back. Have a look at one of my previous threads and see if it helps.