i am buying a paddle kit from pathfinder has anyone got any pics how the linkage all connects i.e from the paddles how it fits through the dash ect. i have the normal linkage through the tunnel at the moement
many thanks
simon

gear change mech in my archive

rs250 brake lever bolted to cradle mount

then 8mm threaded bar with sleeved bar from B&Q to give extra strength

and rose joints

If you want some thick wall ali tube that you can tap to M8 to take a male M8 rod end then let me know as I bought 5m when I did mine as it was cheaper and have some left over.

Rich.

some pics in my archive using cable set up(on pathfinders)

This is how ours is done: