Board logo

what else do i need ?
andy o - 30/1/07 at 07:39 PM

if i were to fit a bike engine in kit what else do i need apart from engine /box ie
loom/ecu etc?

jacko - 30/1/07 at 07:49 PM

Prop shaft --money spare parts for the gear box

only joking
where is hellfire

[Edited on 30/1/07 by jacko]

BenB - 30/1/07 at 08:31 PM

Fuel pump....
Sensors (water temp etc) if EFi....
Lightweight passenger

[Edited on 30/1/07 by BenB]

iiyama - 30/1/07 at 08:38 PM

exhaust, possibly dry sump depending on what you wanna do with finished car and engine fitted, oil cooler, rad, fuel pressure regulater if FI.

nitram38 - 30/1/07 at 09:08 PM

Power commander, CAT and lambda wideband sensor and gauge, plus laptop.

[Edited on 30/1/2007 by nitram38]

ayoungman - 30/1/07 at 10:36 PM

a few spare clutches, oh some more money for an engine rebuild after a couple of years !

Hellfire - 31/1/07 at 12:38 PM

quote:
Originally posted by andy o
if i were to fit a bike engine in kit what else do i need apart from engine /box ie
loom/ecu etc?


That really depends on which bike engine you decide to buy and how easy you want the install to be. For instance, if you want to use the original bike clocks instead of after-market stuff, it's easier to source an engine which includes the clocks. Also as has been mentioned, you might want the fuel pump (which are sometimes mounted in the fuel tank, depending on type of engine) and the fuel sender.

Best bet would be to decide which engine you want to use and then ask what specific parts you'll need.

Phil