Hi all
I am currently making my loom up but have got stuck with the hand brake warning switch, has any one got any wiring diagramns to help me wire up the handbrake switch incorperating the fluid resovoir which only has 2 connectors to it.

regards mick

a 12v positive feed to the warning light on dash this is then linked to both the hanndbrake switch to earth AND the brake fluid res swittch which also goes to earth.

sorry no diagram

This should help.

http://www.dewweb.co.uk/indyblade/images/Indyblade_wiring_v17.pdf

Rich.

Cheers fellas

got it sussed tonight after a few blown fuses