hi how do you fit the prop flange because the clutch housing is part of the cover.anyone got a pic
thanks adam

Couple of ways:
-space out the clinder from the prop for more clearance
or
-cut the cover so the prop fits and fabricate a sandwich plate to hold the cylinder in (See my picture archive).

Thanks.........

[Edited on 11/12/07 by Shandylegs]

I have added 2 pics to my archive to show how i made space for the propshaft. Spacing out the Slave, and trimming the housing of the Slave. Just lengthen the pushrod by the same ammount as you space out the slave.

thanks lads for your help. i get the idea now.
adam