Mike S
|
| posted on 14/11/05 at 04:14 PM |
|
|
Fuel Injection Joints
Just finalising the fuel system.
I am using a Blackbird injection engine using the original bike fuel pump.
I know that the SVA man will check that the fuel hose is for use with fuel injection.
Do the unions have to be of the swaged type or are stainless hose clamps (Jubilee type) ok?
I currently have banjo's which have the barbed hose connection with stainless hose clamps.
I'm just wondering if this is ok for SVA ?
Thanks
Mike
There are more horses' asses in this world than there are horses
|
|
|
|
|
JAG
|
| posted on 14/11/05 at 04:24 PM |
|
|
Hose clamps on barbed fittings is fine.
My MX5 engine runs FI and I simply fitted the correct fuel hoses and 'proper' fuel hose clamps - NOT JUBILEE CLIPS.
Justin
Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!
|
|
|
.jpg)
