smart51
|
| posted on 2/12/05 at 01:10 PM |
|
|
How big is your cat?
What is the size of the cat that you used to get through SVA? I failed SVA a few weeks ago on Hydrocarbons. I think it might be because the cat was
too small or too old. It was 100mm in diameter and about 100mm long.
MNR have sent me a replacement that is both wider and a lot longer. So much so that if fitted, my silencer would go under the rear wing by about
80mm.
Either I need a shorter cat or a shorter silencer. My can is a fairly standard 605mm long (2" . So what size is your cat?
|
|
|
|
|
smart51
|
| posted on 2/12/05 at 04:32 PM |
|
|
The rear wing is quite low to the gound and the can is quite wide. It would scrape on the ground a lot if I fitted it that way.
|
|
|
Messenjah
|
| posted on 2/12/05 at 05:16 PM |
|
|
about a foot long from the tip of its tail to its nose its only a baby tho
|
|
|
zilspeed
|
| posted on 2/12/05 at 06:25 PM |
|
|
quote:
Originally posted by Messenjah
about a foot long from the tip of its tail to its nose its only a baby tho
Bugger - beat me to it.....
|
|
|
