JoaoCaldeira
|
| posted on 6/1/06 at 08:53 AM |
|
|
R1 2002/03: Power Commander III oe IIIr
Hi.
For our BEC porpuses, is there any need of the IIIr over the III?
Thanks in advance,
Joao Caldeira
|
|
|
|
|
ChrisGamlin
|
| posted on 6/1/06 at 11:13 PM |
|
|
As you probably know the IIIr also gives you ignition mapping as well as fuelling. Ive personally got a IIIr but only because it came up cheap on
ebay, I think a IIIUSB would do the job perfectly well in 99% of circumstances and its only if you're trying to eek out the very last horsepower
or you intend on changing things like cams that the IIIr becomes a significant benefit.
|
|
|
speed8
|
| posted on 9/1/06 at 09:34 AM |
|
|
I was looking for a PCIIIUSB based on a post here which suggested I wouldn't need a PCIIIr. However, a IIIr turned up on ebay and I bagged it,
brand new, in the box for 130quid. Bargain
Keep your eyes peeled.
|
|
|
G.Man
|
| posted on 9/1/06 at 12:05 PM |
|
|
1 thing to be aware of, is that some PC3USB's are infact PC3R's in a PC3USB case...
I would suggest that a PC3USB would be the best bet, and a plain old ignition advancer plate...
Most places wont have the skills to do a full setup on a PC3R anyway, so go with aftermarket parts
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
