Guinness
|
| posted on 11/1/06 at 02:54 PM |
|
|
BEC Engine Stand?
I am preparing to swap my existing engine (C) out of the Indy, and put the spare in (D).
Once the C engine is out I am planning on stripping it back, carrying out some repairs, modifications etc. Basically has anyone got any tips on
handling the engine once it's out? I can't use a normal engine stand as it won't bolt up to the plates and as I plan on splitting
the case to change the gearbox I can't see how to use the engine mounts.
Anyone any tips, or it is just the case that they are so light I can just leave it on the bench?
Cheers
Mike
|
|
|
|
|
shortie
|
| posted on 11/1/06 at 03:08 PM |
|
|
Just left mine on the bench mate and the floor, no problems.
|
|
|
JoelP
|
| posted on 11/1/06 at 07:05 PM |
|
|
i made a small frame to stand mine on, holds it up and level nicely, but not quite high enough to work on. Im sure i could do it better next time. I
just whipped it up out of 25mm tubes and some 3mm flat bars.
|
|
|
G.Man
|
| posted on 11/1/06 at 09:41 PM |
|
|
Use a normal engine stand, but bolt it on side ways on
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
