mkblade
|
| posted on 22/4/06 at 01:45 PM |
|
|
fireblade carbs
hi everyone,
seems my missfire running problems,are due to no2 mixtue screw falling out of the carb and no1 was hanging out.i only noticed it when i took the carbs
off to strip them .
i have the missing mixtue screw but the small spring has gone,any one got any spares.
honda do a screw &spring in a kit £12.00 thought i would check on here first.
many thanks
simon
|
|
|
|
|
mkblade
|
| posted on 22/4/06 at 01:46 PM |
|
|
also can any one recommend a good starting point on setting the mixture screes i.e 3 turns out ?
|
|
|
the_fbi
|
| posted on 22/4/06 at 04:24 PM |
|
|
I'm sure AB Performance will have a few knocking about, and be able to advise on the starting position of the screw.
A.B. Performance
Olivia House
Thingoe Hill
Bury St Edmunds
Suffolk IP 32 6BE
United Kindom
01284 703101
sales@abperformance.co.uk
|
|
|
